Abstract A continuous increase in levels of atmospheric pollution and emission restrictions has forced scientists and engineers to adopt new strategies to improve and develop internal combustion engines. One strategy is based on the development of new simulation methodologies using computational fluid dynamic (CFD) techniques, proposed in the present article. In this study,the dynamic loop methodology with ANSYS Fluent code is proposed to perform the numerical simulation ofa four-stroke spark ignition engine. The complexity of the real case was first simplified with three-dimensional CAD geometry, which was then discretized in ANSYS Meshing, whereby a hybrid mesh was created using prismatic and tetrahedral elements. Simulations for in-cylinder analyses were performed in cold flow and employing common flow parameters, such as swirl and tumble. The mesh quality results were classified as good or excellent, being higher than 0.79 for orthogonal quality criteria and lower than 0.36 for skewness criteria. Turbulent effects were introduced concerning the opening and closing of the valves. It was found that the turbulence increases during the intake stroke up to 90°, and during the power stroke, wherein the of the piston bowl, had a great contributionthat can be seen from the swirl and tumble profile for the engine cycle. In the case of the turbulence intensity, a sharp increase was registered during the admission step up to 90°, at which point the turbulence intensity was 4.0. It canbe concluded that this is an innovative approach, capable of simulating the engine motion profile in cold flow.

Resumo O objetivo do presente estudo foi identificar o limiar de frequência cardíaca baseado na cinética da frequência cardíaca durante o exercício máximo graduado em jogadores de futebol. Vinte e seis jogadores de futebol masculino realizaram um teste de exercício máximo (protocolo de Bruce) em uma esteira motorizada. O consumo de oxigênio (VO2) e a freqüência cardíaca (FC) foram monitorados, registrados e reamostrados a 3,5Hz. O limiar ventilatório (LV), a compensação respiratória (CR), os pontos de deflexões da frequência cardíaca (PDFC1 e PDFC2) e o limiar da cinética da frequência cardíaca (LCFC) foram determinados por métodos computadorizados. A variabilidade da frequência cardíaca (VFC) foi avaliada no domínio da frequência. A média do LCFC foi de 89,9 ± 1,2% do VO2 de pico. O LCFC demonstrou correlações e diferenças significativas em relação ao PDFC1 (r = 0,46) e ao LV (r = 0,51), mas não foi diferente e altamente correlacionado com PDFC2 (0,98) e CR (0,90). Os gráficos de Bland Altman mostraram todos os atletas em 95% dos limites de concordância, e o coeficiente de correlação intraclasse apresentou boas concordâncias entre os pontos obtidos com o LCFC em comparação com o PDFC2 (0,96) e CR (0,98). A LCFC foi altamente correlacionada com PDFC2 e CR, sugerindo que poderia ser um marcador de fadiga cardiorrespiratória.

Abstract The main of the present study was to identify the heart rate threshold based on heart rate kinetics during graded maximal exercise in football players. Twenty-six male football players performed a maximal exercise test (Bruce protocol) on a motor-driven treadmill. Oxygen uptake (VO2) and heart rate (HR) were monitored, recorded and resampled at 3.5Hz. The ventilatory threshold (VT), and respiratory compensation (RC), heart rate deflection points (HRDP1 and HRDP2) and heart rate kinetics threshold (HRT) were determined by computerized methods. The heart rate variability (HRV) was assessed in the frequency domain. The HRT averaged 89.9 ± 1.2 % of the VO2 peak. The HRT showed poor correlations and significant differences compared with HRDP1 (r = 0.46) and VT (r = 0.51), but was not different from, and highly correlated with, HRDP2 (0.98) and RC (0.90). Bland Altman plots showed all athletes into 95% of limits of agreement, and intraclass correlation coefficient showed good agreements between points obtained from HRT compared with HRDP2 (0.96) and RC (0.98). The HRT was highly correlated with HRDP2 and RC, suggesting it could be a marker for cardiorespiratory fatigue.

One new methodology for analysis of the antimicrobial oxolinic acid (OXA) based on adsorptive stripping voltammetry (AdSV) in carbon paste electrode (CPE) was developed and applied in untreated pond water sample. Cyclic voltammetry (CV) indicated that an irreversible anodic process occurs in KOH solution as supporting electrolyte. Quantification of the antimicrobial was carried out by differential pulse adsorptive stripping voltammetry (DPAdSV) at potential of deposition (ED) +1.05 V for 45 s to examine OXA adsorption on the surface of CPE. The limits of detection (LOD) and quantification (LOQ) of the method for OXA analysis were determined. The values of LOD were 0.0570 and 0.512 mg L-1 in absence of matrix and in the water sample, respectively, and the corresponding values of LOQ were 0.192 and 1.707 mg L-1, respectively. The apparent recovery percentage for different concentrations of OXA in natural waters ranged between 98.4 and 109%.